Photo

Description The tripod is intended to assemble demonstration expermimental sets on demonstration table.

Technical features

Great rod length, 600 mm Small rod length, 400 mm Prop sizes, 260 mm х 260 mm х 90 mm Rodded ring diameter, 100 mm

Device configuration

Stand with the legs regulated, 1 item Great rode with tread tip, 1 item Small rode with tread tip, 1 item Fixation socket, 4 items 3-pinchers holder, 1 item 4-pinchers holder, 1 item Chain holder, 1 item Rodded ring, 1 item Hooked socket, 2 items

The experiments

Tripod construction and utilization The tripod assembling starts from stand mounting. The stand is installed at even horizontal surface. Horizontal line is checked by rotating pier head. Vertical and/or horizontal rods are fixed by screws. Then the necessary number of sockets is installed on the rods. Two foundations are linked by horizontal rod due to achieving additional steadiness. The experimental models can be raised by linking via sockets or pins the connective rods which are utilized as stands. The П-like model of parallel stands is assembled for hanging rather complicated devices. The frame set is intended (supplied separately). A ring with rode is utilized for fixing the items having big cross-section, e.g. retorts. The ring has a copler designed to fix great round items, e.g. retorts. A butterfly-nut at ring foundation is utilized to fix a ring at angle to horizontal plane. Irrational items or vessels with diameter over 200 mm are fixed by means of a chain clip holder. The item is put into holder utilizing rubber props as stops. Then the appropriate chain is fixed at holder hook, and the whole item is getting surrounded by chain. Strength of fixation is adjusted by turing the thumb nut. A coupled socket is utilized to assemble devices containing thread suspensions.

The tripod provides fixating the necessary devices at various heights and angles.